PMV-F Series a multi-stage vertical inline magnetic drive pump with precision injection made with glass fiber reinforced PPS (PM-V Series) or ETFE (PM-V-F Series) material suitable for a wide variety of applications including filtration and chemical transfer pumps available from 3 to 11 stages flow rates up to 26.5GPM (100 lit/min) and discharge head up to 128 ft (90m) standard NEMA-C and IEC motors from 1/2HP (0.37kw) to 2HP (2.2kw)   The table below provides links to the performance curves and installation, construction and 3D drawings for all PMV-F Series pumps. These documents are written in Adobe® Reader® format. If you don't already have Reader® installed on your computer, you may download it for free by clicking this icon: PMV-F Series Pump Drawings Model Number Installation Drawings Construction Drawings 3-Dimensional Drawings Performance Curves NH-250PMV-F-3 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-4 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-5 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-6 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-7 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-8 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-9 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-10 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-F-11 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz                 EMEC Americas - 336 Broad Street - Fitchburg, MA 01420 - T: 978.400.5507 - F: 978.400.5805 - info@emecproducts.com