PMV Series a multi-stage vertical inline magnetic drive pump with precision injection made with glass fiber reinforced PPS (PM-V Series) or ETFE (PM-V-F Series) material suitable for a wide variety of applications including filtration and chemical transfer pumps available from 3 to 11 stages flow rates up to 26.5GPM (100 lit/min) and discharge head up to 128 ft (90m) standard NEMA-C and IEC motors from 1/2HP (0.37kw) to 2HP (2.2kw)   The table below provides links to the performance curves and installation, construction and 3D drawings for all PMV Series pumps. These documents are written in Adobe® Reader® format. If you don't already have Reader® installed on your computer, you may download it for free by clicking this icon: PMV Series Pump Drawings Model Number Installation Drawings Construction Drawings 3-Dimensional Drawings Performance Curves NH-250PMV-3 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-4 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-5 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-6 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-7 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-8 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-9 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-10 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz NH-250PMV-11 Installation Drawing Thread Flange Thread Flange 50 Hz 60 Hz                 EMEC Americas - 336 Broad Street - Fitchburg, MA 01420 - T: 978.400.5507 - F: 978.400.5805 - info@emecproducts.com